Xe dụng cụ sữa chữa đa năng 190 chi tiết Facom JET7.M140A
SET CM.140A WITH 7-DRAWER ROLLER CABINET JET.7GM3
| JET.7GM3 | 1 | JET+ 7-drawer roller cabinets - 3 modules per drawer |
| 440.JE18 | 18 | Combination wrenches 6 to 24 mm |
| 440 | 6 | Combination wrenches 26 to 30 and 32 mm |
| 39.JE10T | 10 | Roll set of short combination wrenches 3.2 to 11 mm |
| 44.JE12 | 12 | Open-end wrenches 6 to 32 mm |
| 113A.10C | 1 | Adjustable wrench 10" |
| S.440AP | 29 | 1/2" Sockets and accessories: 8 to 32 mm (in a case) |
| RL.NANO1 | 38 | 1/4" sockets: 5.5 to 14 mm and accessories (in a case) |
| AN | 3 | Screwdrivers for slotted heads: 3x75 - 4x100 - 5.5x100 mm |
| ANF | 2 | Screwdrivers for slotted heads 6.5x150 - 8x200 mm |
| AWH10X175 | 1 | Hexagonal blade screwdriver for slotted heads with hexagon shoulder |
| ANP | 3 | Screwdrivers for Phillips® PH head 0-1-2 |
| AWPH3X150 | 1 | Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| AND | 3 | Screwdrivers for Pozidriv® PZ heads no. 0-1-2 |
| AWDH3X150 | 1 | Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder |
| A.VE | 3 | 1,000 Volt insulated screwdrivers: slotted head 3.5x100 - 4x100 - 6.5x150 mm |
| AP.VE | 2 | 1,000 Volt insulated screwdrivers: Phillips® 1x100 - 2x125 |
| 701B | 1 | Multifunction tester |
| AV.HT1B | 1 | Voltsage tester screwdriver 90 to 480 Volts |
| 82H.JP9A | 9 | Sleeve set of hexagonal keys: 1.5 to 10 mm |
| 89.JP8A | 8 | Torx® keys no. 10 to 45 |
| 187.18CPE | 1 | Sheathed combination pliers |
| 192.16CPE | 1 | Piano wire diagonal cutters |
| 181A.25CPE | 1 | Lockable multigrip pliers |
| 185.20CPE | 1 | Sheathed straight half-round nose pliers |
| 188.16CPE | 1 | Sheathed flat-nose pliers |
| 495A.22EL | 1 | Heavy-duty end nippers |
| 501 | 1 | Long-nose lock-grip pliers |
| T5.L65 | 1 | Trigger-release lock-grip pliers (with aluminium griping) |
| 169A | 3 | Inside-circlip® pliers 13 - 18 - 23 |
| 167A | 3 | Outside-circlip® pliers 13 - 18 - 23 |
| 893.316 | 1 | Locking tape measure 3 m |
| 234 | 1 | Scriber |
| DELA.1051.05 | 1 | Rule 300 mm |
| 804 | 1 | Feeler gauge, 19 blades |
| 603F | 1 | Hacksaw frame |
| 668B.8 | 10 | Bimetal hacksaw blades |
| STG | 5 | Files |
| AP8X125 | 1 | Square punch |
| 200H | 2 | Riveting hammers 26 and 32 mm |
| 208A.32CBA | 1 | Plastic-tip mallet |
| 247.G | 2 | Sheathed nail-sets: 2 - 4 mm |
| 249.G | 2 | Sheathed drift punches set: 2 - 4 mm |
| 263.18 | 1 | Chisel |
| 256.4 | 1 | Precision centre punch 4 mm |
| 134A.18 | 1 | Pipe wrench |
| Y.RIV1 | 1 | Riveting kit |
| 374A.20 | 1 | Double-action oil can |
| 840.1 | 1 | Electricians knife with wire stripper |
| 841 | 1 | Electricians scissors |
| 834.R2 | 1 | Articulated mirror |
